Lathe machine for tool joint


 

 

This pipe lathe machine is manual type, they are widely used in oil, chemical, geological prospecting industrial etc for kinds of pipe thread turning. Especially suitable for tool joint rough machining and semi-finishing machining. It also can be used as conventional lathe, which can cut excircle surface, inner hole,  end face, circular arc,taper, step, chamfer, metric/inch thread etc:

             Items

Unit

HY-1320

Max. swing diameter over bed

mm

φ680

Max. swing diameter over saddle

mm

φ400

Max. diameter of workpiece

mm

φ190

Max. length of workpiece

mm

1000

Manual chuck diameter

mm

φ500

Spindle speed range

r/min

20~350

Spindle bore diameter

mm

φ200      

Carriage quick moving speed

m/min

3.8

Distance from tool base to spindle center

mm

32

Tool section dimension

mm

32×32

Tool rest turning angle

 

±90°

Spindle center height

mm

1100

Max. travel of horizontal tool rest

mm

445

Max. travel of small tool rest

mm

200

Tailstock sleeve diameter

mm

100

Tailstock sleeve stroke

mm

250

Tailstock sleeve tape hole

 

Mohs 5#

Tip taper

 

Mohs 5#

Main motor model

 

YPNC-33.3-11-B-B3

Main motor power

kW

11

Roughness

mm

Ra1.6~Ra3.2

Machine weight

5700

Machine dimension(L×W×H)

mm

3700*2000*1600